The Bungard CCD/2-Eco completes the Bungard CNC segment for the low price level.
The machine is especially interesting for beginners with a low budget, because it has on the one hand an unbeatable price, but on the other hand offers the same mechanic quality and precision of all other Bungard CNC machines.
In opposit to all other CCDs, this machine is equipped with a low-cost eco-spindle which allows speeds from 5000 up to 35000 U / min. For normal everyday work such as isolation milling and contour milling of printed circuit boards, this spindle is highly sufficient. For for aluminum and non-ferrous metals however not. Of course the machine can be retrofitted at any time thereafter with a high-speed spindle.
The CCD/2-Eco is a high quality Computer Controlled Drilling machine with semi-automatic tool change. It allows direct processing of Excellon / Sieb & Meyer drill data or HP-/ GL data for the production of printed circuit boards (drilling, milling, isolation routing) and milling/engraving of plastics.
In addition to the spindle the Bungard CCD/2-Eco can be upgraded with a dispensing device for solder paste or glue, a laser exposure head for exposing photoresists and a camera for calibration and inspection tasks.
|Power supply:||110-240 V, 50-60 Hz + vacuum cleaner (vacuum cleaner not part of delivery)|
|Range of RPM:||5.000 – 35.000|
|Traveling speed:||1 – 9000 mm/min|
|Software resolution:||0,0001mm (0,1µm)|
|Mechanical resolution:||step resolution: 1/16 (3,175µm)|
|Tool diameter:||0.4mm – 3.0 mm (recommended, bigger tool diameter possible)|
|Position accuracy:||20 ppm (0.002%) over the entire work space:|
|Maximum position speed per axis:||9000/mm/min (=150 mm/s)|
|Maximum working speed per axis:||
9000/mm/min (=150 mm/s), individual setting on a per-tool basis,
|Drill speed:||8.000 holes/h|
span fixing, clamp fixing, reference pin system, stack processing possible
|Working area mm||270x325x38|
Vacuum table, protection hood or protection rack, converter software IsoCam, fiducial recognition and calibration with camera, laser exposure of photo resists, aluminium work table, routers engine adapter for plastic milling and many more.
Upgrade to Kavo high-frequency spindle (this requires: Spindle holder 33mm, spindle 4010, inverter in Al-housing for mounting on the Y-carriage, 8-wire Chainflex control wire).
|Amount of delivery
Integrated mechanical milling depth limiter and pressure foot
RoutePro3000 (Windows XP - Windows 10 64bit) for drilling and milling
start adapter for vacuum cleaner
Set of Allen Keys
On the back of the power supply is an IEC socket. This is used to turn the vacuum cleaner on and off together with the spindle. If you connect other devices to the IEC-socket, make sure that power consumption of this device does not exced 3000W!