Calibrate 3000 - The calibration module
for all BUNGARD CCD machines
With the calibration module, you can
Rework could also be:
To use the calibration functions, you need to mount the camera to the Bungard CCD and activate the calibration license.
A possibly needed active usb-extension is not part of delivery.
At first you must calibrate the offset between spindle tip and cross hair of the camera.
Only if the camera offset to the spindle is correct you can start to calibrate the pcb.
Fix your pcb to the base of the machine. Load the project into RoutePro 3000 and activate the calibration function
in tab General.
If now you click on Start at tab Run CNC, the machine will at first move to the position, where it believes to find the
drill hole on the utmost lower left (with a routing file the machine will drive to the start point of the vector on the
utmost lower left. We recommend to use a drill layer, at best the reference hole file).
With the arrow buttons centre the cross hair on the actual position of the drill hole and confirm this position by
clicking in the green check sign in the middle of the direction arrows. The camera will then drive to the drill hole on
the upper right. After centering and confirming the position the software will move and rotate the layout in the
viewer accordingly and processing of the board starts. The calibration remains active till the end of the process.
Calibration will be lost if you open another project or if you change the position of the layout in the software
(change of offset, scaling etc.)
Pay heed to the safety regulations of the Bungard CCD.
|Application:||Calibration of pcbs; planned: machine calibration|
|Scope of delivery:||Camera with USB-cable
holder to mount camera to CCD
possibly an active usb extension is required. This extension is not part of delivery.
|Windows 8, Windows 7, Windows Vista, Windows XP with Service Pack 2 (SP2) or higher
(except Windows XP 64-Bit). at least: Intel Dual-Core 1,6 GHz or higher, 1 GB RAM. Recommended:
Intel Dual-Core 3,0 GHz or higher, 2 GB RAM
hard drive: 1,5 GB free storage
Other: USB 2.0