Bohrer und Fräser - Bungard Elektronik GmbH & Co.KG

Consumables

Drills and Routers

High quality, precisely grinded carbide drill and routing bits. All models have a reinforced shank of 3,175 mm and are equipped with a distance ring. The distance from the tip to the upper side of the ring is 21 mm. The ring has a diameter of 7.5 mm and is labeled or color-coded accosding to the diameter. The tools are packaged in resealable plastic boxes.

Material: Tungsten Carbide

 

reinforced shaft: 3.175 mm

 

Packaging unit: 10 pieces

 

Tungsten Carbide Drills

For PCB drilling. Two flutes, righthand turn. Diameter: 0.3 to 3.0 mm in 0.1 mm increments

Contour Routers - RPU Type

For Aluminium routing/milling. Two flutes, upward swarf ejection, fish tail tipped. On-stock diameters: 0.8, 1.0, 1.2, 1.5, 2.0, 2.5, 3.0 mm

Contour Routers - SC/FT Type

For PCB routing, spiral shaped teeth, upward swarf ejection, fish tail tipped. On-stock diameters: 0.8, 1.0, 1.3, 1.5, 2.0, 2.5, 3.0 mm

For isolation milling under 0.6 mm we offer:

SC FT Router cylindrical

0,5; 0,4 and 0,3 mm

Bungard Special isolation milling routers 0.1 and 0.2 mm

These routers are cylindrical only in the last Millimetre. This way there is less risk of breaking the router. For experienced operators

V-Cut Routers G30°N Type

For Isolation routing and fine engraving, two flutes, 30° tip angle. For Channels of 0.1 – 0.3 mm width (depending on cutting depths).

Contour Routers G60°N Type

For Isolation routing with or for engraving. Two flutes, 60° tip angle. For Channels of 0.2 – 0.5 mm width (depending on cutting depths).

High quality, precision tungsten carbide drill and routing bits with 3.175 mm(1/8”)shaft.
All tools have 7.5 mm wide collets with a distance of 21 mm from the tip to the upper side of the collet.
The tools show the diameter or are colour coded and come in re-usable plastic boxes.
Within one class of price, tools with different diameters can be mixed to give one unit of 10pc.