Made in Germany

20 August 2019

Waste water treatment

IONEX A (KA) / B (KB)

The name IONEX stands for ION-EXchanger, which is the very heart of this modern waste water treatment system. The Ionex is a modern and compact plant to treat rinsing water coming form the etching or through-hole-plating machines of a pcb laboratory. We offer 4 basic variants, which differ in rinsing water through-put and ion capacity. Type A and B are equipped with a cotton pre-filter, two cation columns and a ph neutralization column. Type KA and KB have three ion exchange columns.

The cation columns color red, when loaded with ferric ions and blue/green, when loaded with copper ions. Loading of anion column can be testet by measuring the conductance of the cleaned water.

Loaded columns can be sent to Bungard for regeneration or we support you to do the regeneration yourself. The drain water quality from this system is in accordance to German directives, which are of the highest standards world wide!

Dimensions (LxWxH): approx 900 x 600 x 1500 mm (B/KB)

Tank: max. 220 l (B/KB)

Flow rate: ca. 20 l/h (B/KB)

Cleaining capacity: 15 l/h (B/KB)

Features

For post-treatment of etching and galvanic rinsing water
Removal of solids and all heavy metals
closed water cycle possible (K-versions)
Decrease of chemical oxygen demand
Integrated storage sump with capacity of 110 l (A/KA) or 220 l (B/KB) for collecting rinsing water
Strong built-in hose pump
Integrated cotton fi lter candle 10 μm (active carbon filter with K-versions)
Significant change of color when loaded with metals
Lower and upper sump level control switch
Easy handling and operation
Regeneration of ion exchange resins by supplier or by user at little cost
IONEX A and B perform additionally PH neutralization and discharge to the drain

IONEX A (KA)

Power supply: 230 V, 50 Hz, 50 W

Weight: 30 kg

Tank capacity: 110 l

Cleaning capacity: 10 l / h

Dimensions (LxWxH): 700 x 430 x 1300 mm

IONEX B (KB)

Power supply: 230 V, 50 Hz, 100 W

Weight: 60 kg

Tank capacity: 220 l

Cleaning capacity: 20 l / h

Dimensions (LxWxH): 900 x 600 x 1500 mm

Merkmale

zur Nachbehandlung von Ätz-und Galvanospülwässern
entfernt Schwermetalle und Feststoffe
geschlossener Wasserkreislauf möglich (Kreislauf= KA/KB)
senkt den chemischen Sauerstoffbedarf
integrierter Sammeltank für 110/220 Liter Abwasser
Leistungsstarke Schlauchpumpe
integrierter Schwebstoffilter (10 µm) (mit Aktivekohle bei Typ K)
deutlich sichtbarer Farbumschlag bei beladenen Kationentauschersäulen
Überlauf- und Trockengehschutz durch Niveauschalter

Abmessungen (LxBxH): 700 x 430 x 1300 mm

Gewicht: ca. 30 kg

Füllmenge: max. 110 l

Tauscherharz je Säule: 1,2 l

Förderleistung Pumpe: ca. 10 l/h

Elektrischer Anschluss: 230 V~, 50 Hz, 50 W

Abmessungen (LxBxH): 900 x 600 x 1500 mm

Gewicht: ca. 60 kg

Füllmenge: max. 220 l

Tauscherharz je Säule: 2,5 l

Förderleistung Pumpe: ca. 20 l/h

Elektrischer Anschluss: 230 V~, 50 Hz, 100 W

As an option the IONEX can be equipped with a conductance meter (IONEX KA/KB) or a ph-meter (IONEX A/B). This way you have the quality of the treated rinse water always under control.

Closed loop rinsing water:

IONEX KA and KB fi lter next to the metalic cations also the anionic halogens from the rinsing water, so you receive demineralized water. The demineralized water is collected and pumped back to the etching or throughhole-plating machine.

Of course the machines of the IONEX family can be adapted according to your needs. The IONEX XXL e.g. cleans 1500 l of rinsing water. The IONEX AU fi lters gold ions out of rinsing water from a nickel-gold-processing machine. These gold ions can be regenerated and returned to the gold bath.

Ionex Schema A-B

Ionex Schema KA-KB

NEW

Labion 2

Ion exchanger for fresh water cleaning. After treating your fresh water with LABION 2 you will receive demineralized water, which is necessary e.g. for through-hole-plating machines. Full system incl. µSiemens conductivity measurement and readout via diodes:

0,1 µSiemens - 1. green diode

5 µSiemens - 2. green diode

20 µSiemens - 1. red diode

50 µSiemens - 2. red diode

dimensions: 115 x 115 x 515 mm
capacity per hour: +-
capacity per filter candle: 5°dG= 810 liter / 10° dH = 405 liter

Electrical Connection: 110-220V AC

We supply replacement filter candles.