CNC machine

CCD/2 MTC

The Bungard CCD/2/MTC is a high quality Computer Controlled Drilling machine with semi-automatic tool change. In contrast to the CCD/MTC the CCD/2 has a half sized work area (325 x 270 compared to 325 x 495mm) and an integrated control unit underneath the table.

Compared to the ATC models, the software interrupts the operation during the tool change and the new tool is changed manually (turning the knob changes by a quarter turn; motors remain empowered and hold the position).

The CCD/2 has the same robustness and precision as all the other CCD models. It is ideal as an entry-level model for isolation milling. If you want to operate the CCD/2 with cooling, you need to protect the control unit from the cooling. Please contact us beforehand.

Dimensions (LxWxH): 700 x 550 x 300 mm

Work area: 270 x 325 x 38mm

Traveling speed: 1 - 9000 mm/min

Mech. resolution: step resolution: ⅛ mil (= 3.175µm)

In contrast to all other CCD models, the machine zero point is at the front left. The X axis is the traverse over the table, whereas the Y-axis is located on table level. The CCD/2 can not be converted to automatic tool change. If you possibly want to upgrade at a later time, please contact us before purchase. If necessary we can create a special version for you.

Techn. Data

Power supply: 110-240 V, 50-60 Hz + vacuum cleaner (1500W)

Range of RPM: 5.000 - 63.000

Traveling speed: 1 – 9000 mm/min

Resolution: 0,01 µm

Step resolution: Software selectable: 1 mil, ½ mil, ¼ mil, 1/8mil, optional: 1/16mil + 1/32mil

Tool diameter: 0.1 mm – 3,175 mm (recommended, bigger tool diameter possible)

Position accuracy: 3,2µm

Maximum position speed per axis: 9000/mm/min (=150 mm/s)

Maximum working speed per axis: 9000/mm/min (=150 mm/s), individual setting on a per-tool basis, independent from position speed

Drill speed: 5/s (= 18.000 holes/h = 300 holes/min)

Required accessories: Computer

Board fixation: span fixing, clamp fixing, reference pin system, stack processing possible
Option: vacuum fixation

CCD/2

Weight: 30 kg

Dimensions (LxWxH): 700 x 550 x 300 mm

Work area: 270 x 325 x 38 mm

Tool change: no

Scope of delivery

Mechanic unit + control unit + complete cabeling
Superb and sturdy high frequency spindle with eddy current brake and load control
Integrated mechanical milling depth limiter and pressure foot
Driver software RoutePro3000 (Windows 7TM- Windows 10TM-64bit) for drilling and milling
Powerful, adjustable (500-2000 W) + start adapter for vacuum cleaner, vacuum cleaner included in delivery
Manual, USB/serial adapter, Set of Allen Keys
On the back of the power supply is an IEC socket. This is used to turn the vacuum cleaner on and off together with the spindle. If you connect other devices to the IEC-socket, make sure that power consumption of this device does not exced 3000W!

Options

vacuum table
protection hood or protection rack
converter software IsoCam
fi ducial recognition and calibration with camera
laser exposure of photo resists
aluminium work table
adapter for a router engine suitable to mill plastics
Upgrade to Kavo high-frequency spindle (this requires: Spindle holder 33mm, spindle 4010, inverter in Al-housing for mounting on the Y-carriage, 8-wire Chainfl ex control wire).

Techn. Data

Power supply: 110-240 V, 50-60 Hz + vacuum cleaner (1500W)
Range of RPM: 5.000 - 63.000
Traveling speed: 1 – 9000 mm/min
Resolution: 0,01 µm
Step resolution: Software selectable: 1 mil, ½ mil, ¼ mil, 1/8mil, optional: 1/16mil + 1/32mil
Tool diameter: 0.1 mm – 3,175 mm (recommended, bigger tool diameter possible)
Position accuracy: 3,2µm
Maximum position speed per axis: 9000/mm/min (=150 mm/s)
Maximum working speed per axis: 9000/mm/min (=150 mm/s), individual setting on a per-tool basis, independent from position speed
Drill speed: 5/s (= 18.000 holes/h = 300 holes/min)
Required accessories: Computer
Board fixation: span fixing, clamp fixing, reference pin system, stack processing possible
Option: vacuum fixation
CCD/2
Weight: 30 kg
Dimensions (LxWxH): 700 x 550 x 300 mm
Work area: 270 x 325 x 38 mm
Tool change: no

Mechanic unit + control unit + complete cabeling
Superb and sturdy high frequency spindle with eddy current brake and load control
Integrated mechanical milling depth limiter and pressure foot
Driver software RoutePro3000 (Windows 7TM- Windows 10TM-64bit) for drilling and milling
Powerful, adjustable (500-2000 W) + start adapter for vacuum cleaner, vacuum cleaner included in delivery
Manual, USB/serial adapter, Set of Allen Keys
On the back of the power supply is an IEC socket. This is used to turn the vacuum cleaner on and off together with the spindle. If you connect other devices to the IEC-socket, make sure that power consumption of this device does not exced 3000W!

vacuum table
protection hood or protection rack
converter software IsoCam
fi ducial recognition and calibration with camera
laser exposure of photo resists
aluminium work table
routers engine adapter for plastic milling
Upgrade to Kavo high-frequency spindle (this requires: Spindle holder 33mm, spindle 4010, inverter in Al-housing for mounting on the Y-carriage, 8-wire Chainfl ex control wire).