Made in Germany - Maschinen | Bungard Elektronik GmbH & Co.KG

Made in Germany

Fotobeschichtetes Basismaterial - ORIGINAL BUNGARD - Bungard Elektronik GmbH & Co.KG

Consumables

Presensitized Boards

A value concept for quality.

Our special quality can be measured in the following facts:

We use first-choice laminates approved and certified by UL, NEMA, DIN, IEC and others.

Several types of laminates such as FR2, FR3, CEM1, FR4 and PTFE are available in different thicknesses and copper clads. FR 4 e.g is available in thicknesses of 0.5, 0.8, 1.0, 1.6, 2.0 and 2.5 mm with either 18, 35 or 70 microns Copper. The max. panel size is 510 x 1150 mm. Our cutting service provides sheets down to 50 x 50 mm min. size, with an accuracy of +-0.15 mm.

maximum board size: 510 x 1150 mm

 

minimum board size: 50 x 50 mm

 

copper coating: single or double sided

 

board thickness: 0,5; 0,8; 1,0; 1,5; 2,0 or 2,5 mm

Photoresist

We coat the laminates with a special positive working liquid resist made after our own recipe. The resist features highest exposure sensitivity, short processing turns and large safety tolerannces. The equal and dust-free coating has a defined thickness of 5 µm. The maximum spectral response is in the range of 350 - 400 nm. The line resolution is limited only by the type of exposure unit. Typical exposure times are less than 90 secondes on our exposure unit HELLAS with fluorescent vacuum tubes. The resist allows multiple exposure.

Referring to our special developer, at 20 °C the developing time is less than 45 secondes. On the other hand, the resist is absolutely stable for more than 5 minutes in the developer. It is resistant to acid etching or galvanic chemicals and even permits alcaline etching at a ph less than 9.5.

The boards are protected against mechanical damage and unwanted exposure by a special, blue coloured adhesive foil. Due to this protective foil, no flitters appear when cutting or milling the boards.

Each board is subjected to chemical and physical controls and tests before and after coating.

A shelf live of more than 1 year under normal storage conditions is guaranteed. Even 10 year old boards still work.

Presensitizing Service

We can coat boards that you supply with photoresist. The max. board size is 530 x 1160 mm, the min. board thickness is 0.3 mm. Our pre-sensitizing service includes cleaning, double sided coating in dip technology, pre-aging, optical control and protection foil. Attention: dip rim 10mm on top and drip rim of 10 mm at the bottom will reduce usable size by 20 mm on the short side (530 mm will go down to 510 mm). The rim is on request removed without charge.

We coat the laminates with a special positive working liquid resist made after our own recipe. The resist features highest exposure sensitivity, short processing turns and large safety tolerannces. The equal and dust-free coating has a defined thickness of 5 µm. The maximum spectral response is in the range of 350 - 400 nm. The line resolution is limited only by the type of exposure unit. Typical exposure times are less than 90 secondes on our exposure unit HELLAS with fluorescent vacuum tubes. The resist allows multiple exposure.

Referring to our special developer, at 20 °C the developing time is less than 45 secondes. On the other hand, the resist is absolutely stable for more than 5 minutes in the developer. It is resistant to acid etching or galvanic chemicals and even permits alcaline etching at a ph less than 9.5.

The boards are protected against mechanical damage and unwanted exposure by a special, blue coloured adhesive foil. Due to this protective foil, no flitters appear when cutting or milling the boards.

Each board is subjected to chemical and physical controls and tests before and after coating.

A shelf live of more than 1 year under normal storage conditions is guaranteed. Even 10 year old boards still work.

 Fotobeschichtetes Basismaterial - Bungard Elektronik GmbH & Co.KG

Standard cuttings FR4

1.5 mm
35 μm Cu
1.5 mm
70 μm Cu
210 x 300 210 x 300
200 x 250 200 x 250
150 x 250 150 x 250
160 x 233.4 160 x 233.4
150 x 200 150 x 200
125 x 175 125 x 175
100 x 160 100 x 160
75 x 100 75 x 100

Panels FR4

0.5 – 1.5 mm
18 μm Cu
0.5 - 2.5 mm
35 μm Cu
0.5 - 2.5 mm
70 μm Cu
1.5 mm
105 μm Cu
1.5 mm
Blau/Schwarz 35 μm
510 x 1150 x 0.5 510 x 1150 x 0.5 510 x 1150 x 0.5 510 x 1150 x 1.5 510 x 1150 x 1.5
510 x 570 x 0.5 510 x 570 x 0.5 510 x 570 x 0.5
510 x 1150 x 0.8 510 x 1150 x 0.8 510 x 1150 x 0.8
510 x 570 x 0.8 510 x 570 x 0.8 510 x 570 x 0.8
510 x 1150 x 1.0 510 x 1150 x 1.0 510 x 1150 x 1.0
510 x 570 x 1.0 510 x 570 x 1.0 510 x 570 x 1.0
510 x 1150 x 1.5 510 x 1150 x 1.5 510 x 1150 x 1.5
510 x 570 x 1.5 510 x 570 x 1.5 510 x 570 x 1.5
  510 x 1150 x 2.0 510 x 1150 x 2.0
  510 x 570 x 2.0 510 x 570 x 2.0
  510 x 1150 x 2.5 510 x 1150 x 2.5
  510 x 570 x 2.5 510 x 570 x 2.5

Panels FR2

Format 480 x 1000 x 1.5 mm
35 µm Cu single or double sided

Panels CEM1

Format 510 x 1150 x 1.5 mm
35 µm Cu single sided

Cutting Service

We cut down all boards to non-standard sizes on request. The maximum board size is 510 x 1150 mm, the minimum size is 50 x 50 mm. Rests will be included.
Boards > 2 mm will be cut by saw. Saw cutting loss will be 3 mm per piece.

All specifications are subject to change without notice.

Bungard Elektronik GmbH & Co.KG
fas fa-map-marker

Rilkestrasse 1
D-51570 Windeck

fa fa-fax

+49 2292 / 9 28 28 - 29