Select your language

Multicenter - Nassprozess-Automat von Bungard

Automated Wet Process Line

Multicenter 2030 / 3040

Developing, rinsing, etching, stripping and tin plating in a single machine.

The CNC axis system carries the board over the tanks and dips it in. The touchscreen main menu provides start, load and save programs, parameters and process counter functions.

Board size: 300 × 400 mm (3040)

 

Processes: 5 in one machine

 

Programs: 10 storable

 

Sequences: 18 per program

Features

  • CNC axis system over five tanks, immersion depth and oscillation adjustable
  • Up to 18 sequences per program, 10 programs storable
  • Doors electrically interlocked; emergency plug and fuse isolator included
  • Shake function against drag-out, vibration available as an option
  • Process counter with adjustable alarm for the chemistry change

Techn. Data

Board size: 210 × 300 mm (2030) / 300 × 400 mm (3040)

Tanks: 5 process tanks + filter tank with 3 bag filters, all with ball valve drain

Volumes, 2030: 20 l developer (heated) · 20 l etching (heated) · 10 l each for rinsing, stripping, tin plating, filter · 3040 on request

Pumps: 2 × 80 l/min (developing, etching) · 1 × 40 l/min (filtration)

Heaters: 2 titanium heaters, 1,000 W each, thermostat; PVC tanks max. 50 °C

Power supply: 230 V~, 50–60 Hz, approx. 3,000 W

Materials and weight: PVC, titanium, aluminium profile · approx. 200 kg · height-adjustable feet

  • CNC axis system over five tanks, immersion depth and oscillation adjustable
  • Up to 18 sequences per program, 10 programs storable
  • Doors electrically interlocked; emergency plug and fuse isolator included
  • Shake function against drag-out, vibration available as an option
  • Process counter with adjustable alarm for the chemistry change

Board size: 210 × 300 mm (2030) / 300 × 400 mm (3040)

Tanks: 5 process tanks + filter tank with 3 bag filters, all with ball valve drain

Volumes, 2030: 20 l developer (heated) · 20 l etching (heated) · 10 l each for rinsing, stripping, tin plating, filter · 3040 on request

Pumps: 2 × 80 l/min (developing, etching) · 1 × 40 l/min (filtration)

Heaters: 2 titanium heaters, 1,000 W each, thermostat; PVC tanks max. 50 °C

Power supply: 230 V~, 50–60 Hz, approx. 3,000 W

Materials and weight: PVC, titanium, aluminium profile · approx. 200 kg · height-adjustable feet

multicenter-cnc-achssystem-becken.webp

How a run works

1. Clamp the board

Unlock the doors on the touchscreen, put the board into the holder, close the doors. The machine will not run with a door open.

2. Select a program

Two standard processes are stored; up to ten of your own can be saved and reloaded.

3. Press start

The line runs the sequence by itself; the status window shows the current step.

4. Take the board out

After the last rinse it is developed, etched, stripped and tin plated.

multicenter-cnc-achssystem-becken.webp

1. Clamp the board

Unlock the doors on the touchscreen, put the board into the holder, close the doors. The machine will not run with a door open.

2. Select a program

Two standard processes are stored; up to ten of your own can be saved and reloaded.

3. Press start

The line runs the sequence by itself; the status window shows the current step.

4. Take the board out

After the last rinse it is developed, etched, stripped and tin plated.

Options and Accessories

Vibration option

Factory-fitted: a vibration motor on the holder shakes the boards at an adjustable frequency and further reduces drag-out.

Collecting tray

Chemical-resistant and sealed, holds the entire filling volume — the alternative to a chemical-resistant floor.

Chemistry

Developer, etchant, stripper and immersion tin are available from us, matched to the materials of the line.

Waste water treatment

Run rinse water in a loop, collect it and dispose of it later; only a specialist firm may neutralise it.

Etching / developing machines