Universally electroplating machine

HitecPlate 3040

HitecPlate 3040 is a universally applicable electroplating machine for the deposition of metals and serve for the production of plated-through-hole printed circuit boards in vertical technology for prototype and small batch production.

The HitecPlate 3040 is designed for direct metallization and have baths for process steps cleaning, rinsing, pre-dipping, activating, rinsing, intensifying, rinsing, copper deposition.

Board size: 300 x 400 mm (350x450 possible)

Volumen Treatment tanks: ca. 20 l

Volumen Galvanic tank: ca. 60 l

Working height: 900 mm

The tanks are arranged in series, which leads to a narrow depth and makes later automation possible.

The HitecPlate 3040 machine is designed for plate sizes of 300 x 400 mm² and is equipped with an additional galvanic tank.

Two treatment tanks are equipped with titanium heaters and are thermostatically controlled. The galvanic tanks have an integrated air injection. The cathode bars are driven by a push rod driven again by a DC gear motor. The speed is infinitely adjustable. In addition, a vibration can be retrofitted at any time
The galvanic tank is assigned a continuously variable rectifier. One voltmeter and one ammeter provide information about the electrical values. The particular importance of the flushing is taken into account with a sink behind each treatment bath. These can be continuously cleaned via an overflow with an AquaPur wastewater system.
The process baths used are based on the proven palladium technology (direct metallization with palladium as catalyst).

Techn. Data HitecPlate 3040

Dimensions (LxWxH): 870 x 1520 x 1250 mm

Board size: 300 x 400 mm (350 x 450 mm possible)

Power supply: 230 V AC, 50-60 Hz

Power consumption: 2000 W

Volumen Treatment tanks: approx. 20 l

Volumen Galvanic tank: approx. 60 l

Weight: approx. 200 kg

Working height: 900 mm

Fresh water: 25 mm Spout

Spray rinse connection: 16 mm Spout

Waste water out: 32 mm Spout

Dimensions (LxWxH): 760 x 1350 x 1250 mm

Board size: 200 x 300 mm (250 x 350 mm possible)

Power supply: 230 V AC, 50-60 Hz

Power consumption: 1500 W

Volumen Treatment tanks: approx. 10 l

Volumen Galvanic tank: approx. 30 l

Weight: approx. 130 kg

Working height: 900 mm

Fresh water: 25 mm Spout

Spray rinse connection: 16 mm Spout

Waste water out: 30 mm Spout