AquaPur 1000

The Bungard AquaPur 1000 is a modern and compact system for cleaning the rinsing water in a PCB laboratory, e.g. the rinse water from an etching or a PTH-machine (PTH = Plating through hole) . The system can also be used for the cleaning the rinsing water from steel cliche etching process in the printing industry. After a rough and a fine filter the  AquaPur1000 has two columns of mixed bed resin ion exchanger to remove both metallic cations and anions from the water. This way all your rinsing water regulations are easily met. No further use of chemicals or special expert staff  to e.g adjust ph-level is necessary. As part of a closed cycle of recyclable resources, the used ion exchange columns in this device can be recycled and reusable materials are recovered from the waste water.


The ion exchangers have been found in the field of waste water a very large application.
The rinse water accumulate on the process baths with the metals. The legislature prescribes a recycling and cleaning of the rinse water.


The name IONEX stands for ION-EXchanger, which is the very heart of this modern waste water treatment system. The Ionex is a modern and compact plant to treat rinsing water coming form the etching or through-hole-plating machines of a pcb laboratory. We offer 4 basic variants, which differ in rinsing water through-put and ion capacity. Type A and B are equipped with a cotton pre-filter, two cation columns and a ph neutralization column. Type KA and KB have three ion exchange columns.

DL 500 | Double sided conveyorised spray etching machine

DL 500

The DL 500 is a double sided conveyorised spray etching machine with integrated rinsing zone.

Jet 34 d

Powerful spray etching or spray developing machine mainly designed for use in pcb labs. Capacity up to 3m²/h possible (single-sided, positive material).

SPLASH | Bungard Elektronik - Spray etching machine

Splash/Splash XL

Spray etching machine for laboratory use with integrated static rinse. Machine is suitable for double sided material.

SPLASH CENTER | Bungard Elektronik - Spray etching machine

Splash Center/Splash Center XL

Laboratory etching machine with static and spray rinse, integrated developer tank, a reserve tank for e.g. chemical tinning and a squeeze dryer.

Titan 3500

The Titan 3500 is a double-sided spray etcher for high precision applications. In addition to the patented nozzle system, which ensures uniform wetting of the substrate, the substrate is rotated during the etching process to reliably prevent the formation of an etch shadow and uneven etching by e.g. the trace geometry. This enables structure resolutions down to 40μm with a copper thickness of 35μm.

SPRINT 3000 | Bungard Elektronik - Customized etching system

Sprint 3000

Sprint - that is an innovative and modular system of horizontal, conveyorized spray etching. Suitable for all acid and alcaline etchants.

New! The Sprint (3000/4500/6000) series is made for double sided PCBs with line resolution down to better than 0,1 mm. Machine is available as table top or floor standing version. With this range of products, complete production lines are possible covering developing, etching and rinsing including waste water treatment.